The BLUETTI Elite 200 V2 is a portable power station featuring LiFePO₄ technology with a capacity of 2073.6 Wh and a pure sine wave inverter providing continuous power of 2600 W. The enhanced load mode supports up to 3900 W for purely resistive loads. It is designed to power up to 7 devices simultaneously with two AC outlets (230 V), two USB-C Power Delivery ports (100 W each), two USB-A ports (15 W each), and a 12 V car socket. Charging options include AC input up to 1800 W, TurboBoost mode up to 2300 W, solar panel charging via MPPT input (12-60 V) up to 1000 W and 20 A with automatic PV recognition even when the station is off, and combined AC+DC charging up to 2400 W, allowing approximately 80% capacity in about 1 hour. It also supports car charging with acceleration using an external adapter. The BLUETOPUS AI-BMS system monitors currents, voltage, and temperature, implementing multi-level protections against overload and overvoltage, with a separate grounding terminal for leakage protection. Noise levels at low loads are reduced to 16 dB thanks to adaptive fan control. The BLUETTI Elite 200 V2 can be operated from the front panel and via an app, providing real-time monitoring of charge level, input/output power, and active port groups. The battery is automotive-grade LiFePO₄ with an extended cycle life. This power station is suitable for powering household appliances, networking equipment, and laptops, as well as for outdoor tasks and backup when a compact 2 kWh source with 230 V output and high-power USB-C ports is needed. The BLUETTI Elite 200 V2 is designed for everyday and emergency scenarios where stable sine wave, fast charging input, and solar panel operation are essential.