Power Station for Boiler – How to Choose a Reliable Option for Your Home
February 18, 2026
When a gas or solid-fuel boiler is installed in the house, electricity ceases to be just a convenience. Without it, the pumps, automation, and fans do not work. It seems there is heating, but without the grid everything stops. That is why a charging station for a boiler has become not a whim, but a completely rational solution.
Here what matters is not simply "more power", but operational stability, pure sine wave output, and the ability to sustain the load for several consecutive hours. The boiler does not tolerate surges. It either works normally or enters error mode. Therefore, selection should be based on real specifications - with a safety margin and without illusions - rather than on attractive advertising.
1. Anker Solix F1500 1536Wh 1800W
Anker Solix F1500 1536Wh 1800W is suitable for a home where it is critical for the boiler to continue operating during a power outage. The station successfully powers automation, circulation pumps, and control modules. Thanks to the pure sine wave, it creates no interference for sensitive electronics, allowing the heating system to run stably and without errors.
The presence of UPS mode is especially important for a boiler - when the mains power disappears, the station automatically switches to battery power without restarting the equipment. Charging is possible from a wall outlet, car, or solar panels, which allows using the station both as home backup and as an autonomous power source during extended outages.
Key features:
Support for boiler and pump operation
Pure sine wave
UPS mode with automatic switching
Charging from grid, car, and solar panels
Set of AC outlets, USB-A, USB-C, and car outlet
Specifications:
Battery capacity: 1536 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
2. CTECHi ST2000 2073Wh
CTECHi ST2000 2073Wh is designed for more serious loads in a heating system. If the house has several pumps or additional automation, this station provides extra runtime and power reserve. The pure sine wave ensures correct power delivery to the boiler without surges or unstable signal.
The LiFePO4-based battery is built for long-term use. UPS mode prevents the heating system from stopping during a blackout - especially important in winter. The ability to charge from the grid and solar panels makes the station convenient in conditions of unreliable power supply.
Key features:
Increased capacity for extended heating runtime
Support for multiple connected devices
Pure sine wave
UPS mode
Charging from grid and solar panels
Specifications:
Battery capacity: 2073 Wh
Continuous power: 2000 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
3. BLUETTI Premium 100 V2
BLUETTI Premium 100 V2 is suitable for situations where it is necessary to keep a gas boiler and basic automation running in an apartment or small house. The station delivers stable power and handles short-term peak loads during equipment startup. This is important for pumps that sometimes require significantly more power at the moment of starting.
Switching to UPS mode happens quickly, so the boiler continues operating without interruptions. Charging from grid, car, and solar panels is supported, and an additional battery can be connected if needed. Thanks to its compact size, the station is easier to place near heating equipment.
Key features:
Suitable for powering boiler and automation
Pure sine wave
Fast switching in UPS mode
Option to expand with an additional battery
Charging from grid and solar panels
Specifications:
Battery capacity: 1024 Wh
Continuous power: 2000 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
4. EcoFlow E2000
EcoFlow E2000 is used as a backup power source for home heating systems. Thanks to its large battery capacity and stable output signal, the station is suitable for powering a gas or solid-fuel boiler together with circulation pumps. The pure sine wave allows the electronics to operate without failures - especially important for modern boilers with advanced automation.
The station supports fast charging from the grid and can accept energy from solar panels. If necessary, it can be expanded with an external battery. This option is chosen in situations where it is critical to maintain heating during long outages and not depend solely on centralized power supply.
Key features:
Suitable for powering boiler and pumps
Pure sine wave
Support for charging from grid and solar panels
Option to connect an additional battery
Multiple AC outlets and DC device outputs
Specifications:
Battery capacity: 2048 Wh
Continuous power: 2300 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
5. Jackery Explorer 3000 v2
Jackery Explorer 3000 v2 is designed to power high-energy equipment, including a heating system with multiple pumps. Thanks to its high power and capacity, the station can maintain boiler operation for an extended period. The pure sine wave ensures correct automation performance and protects sensitive components.
The model is equipped with UPS mode, so power switches automatically to the battery during an outage. Charging is possible from the grid, car, and solar panels. Additional flexibility comes from the option to expand the system by connecting an external battery - convenient for homes with higher energy consumption.
Key features:
Support for high-power loads
Pure sine wave
UPS mode
Charging from grid, car, and solar panels
System expansion capability
Specifications:
Battery capacity: 3072 Wh
Continuous power: 3600 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
6. BLUETTI Premium 200 V2
BLUETTI Premium 200 V2 is used for backup boiler power in a private house, where it is important to account not only for automation but also for additional equipment. The station handles stable loads and is suitable for powering a heating system together with pumps and basic household appliances. The pure sine wave maintains correct electronics operation without voltage spikes.
The device supports UPS mode, allowing the boiler to keep running during a blackout. Charging is possible from the grid, car, and solar panels. The battery is rated for a large number of cycles, making the station suitable for regular use as a backup power source.
Key features:
Suitable for powering boiler and additional equipment
Pure sine wave
UPS mode
Charging from grid, car, and solar panels
High battery cycle life
Specifications:
Battery capacity: 2073 Wh
Continuous power: 2600 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
7. NewsMy X2400
NewsMy X2400 is used as a backup power source for a home heating system, where it is important to account for not only the boiler but also circulation pumps. The station delivers a stable pure sine wave signal, so boiler automation operates correctly and without failures. When multiple devices are connected simultaneously, the power reserve allows the system to remain operational during a grid outage.
The model supports UPS mode, helping to avoid boiler shutdown during a sudden power loss. Charging is possible from household mains and solar panels; connection of an additional battery is also provided. The built-in display simplifies monitoring of load and charge level.
Key features:
Suitable for powering boiler and pumps
Pure sine wave
UPS mode
Charging from grid and solar panels
Option to connect an additional battery
Specifications:
Battery capacity: 2016 Wh
Continuous power: 2400 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
8. BLUETTI AC200PL 2400W
BLUETTI AC200PL 2400W is designed to power a heating system in a private house while accounting for additional loads. The station supports boiler, pump, and basic appliance operation during grid interruptions. The pure sine wave provides stable power delivery without sharp voltage fluctuations - important for modern electronics.
The device features UPS functionality and automatically switches to battery power. Charging is possible from a wall outlet and solar panels. It also includes wireless charging for small electronics, but the main focus remains on stable AC and DC power delivery.
Key features:
Support for heating system and pumps
Pure sine wave
UPS mode
Charging from grid and solar panels
Multiple AC outlets and DC outputs
Specifications:
Battery capacity: 2304 Wh
Continuous power: 2400 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
9. Anker 767 PowerHouse - 2048Wh 2400W
Anker 767 PowerHouse - 2048Wh 2400W is suitable for homes that require stable backup power for a boiler and auxiliary equipment. The station is designed for simultaneous connection of several devices, including pumps and heating automation. The pure sine wave ensures correct system operation without interference.
The model supports various charging methods, including grid and solar panels. Built-in wheels and a handle make the station easier to move around the house or technical room. The display helps monitor load and remaining charge during operation.
Key features:
Support for boiler and additional equipment
Pure sine wave
Charging from grid and solar panels
Multiple AC outlets and car outlets
Easy mobility thanks to wheels
Specifications:
Battery capacity: 2048 Wh
Continuous power: 2400 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
10. BLUETTI AC180
BLUETTI AC180 is used for backup boiler power in an apartment or house with moderate load. The station is suitable for gas boilers with circulation pump and electronic automation. The pure sine wave ensures correct control board operation and eliminates failures that can occur with unstable voltage.
The model features UPS mode, so the boiler continues running without restart during a power outage. Charging from wall outlet, car, and solar panels is supported. Thanks to its compact body, the station can be placed near heating equipment, and the display allows monitoring of load and charge level.
Key features:
Suitable for powering boiler and pump
Pure sine wave
UPS mode
Charging from grid, car, and solar panels
Compact body and display
Specifications:
Battery capacity: 1152 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
11. EcoFlow DELTA Pro
EcoFlow DELTA Pro is designed to power a heating system in a private house while accounting for several pumps and additional equipment. The station provides stable pure sine wave output and is suitable for connecting a boiler together with other household appliances. Its large capacity reserve allows it to serve as backup not only for short outages.
UPS mode is supported, so the heating system does not stop when power disappears. The station can be charged from the grid and solar panels and can be expanded with additional batteries. Built-in wheels make moving easier - important for a device of this class.
Key features:
Support for boiler and multiple pumps
Pure sine wave
UPS mode
Option to expand with additional batteries
Charging from grid and solar panels
Specifications:
Battery capacity: 3600 Wh
Continuous power: 3600 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
12. BLUETTI Elite 100 V2
BLUETTI Elite 100 V2 is used for backup boiler power in a small house or apartment. The station supports stable automation and circulation pump operation. The pure sine wave ensures correct electronics power delivery without surges.
UPS mode prevents boiler shutdown during a blackout. The station supports charging from grid, car, and solar panels; an additional battery can be connected if needed. Thanks to its compact size, it is convenient to place in a technical room.
Key features:
Suitable for powering boiler and automation
Pure sine wave
UPS mode
Option to connect an additional battery
Charging from grid and solar panels
Specifications:
Battery capacity: 1024 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
13. EcoFlow DELTA 3 Max
EcoFlow DELTA 3 Max is used as backup power for a boiler in a house with constant load. The station is suitable for heating systems with circulation pumps and automation. The pure sine wave ensures stable control board operation and reduces the risk of errors during voltage surges. The power reserve is sufficient for simultaneous connection of the boiler and some household appliances.
The model supports UPS mode, so power switches without stopping equipment during an outage. Charging is possible from a wall outlet and solar panels. The handle and display simplify placement and monitoring in a technical room.
Key features:
Suitable for powering boiler and pumps
Pure sine wave
UPS mode
Charging from grid and solar panels
Display for load monitoring
Specifications:
Battery capacity: 2048 Wh
Continuous power: 2400 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC
14. EcoFlow DELTA 3 1500
EcoFlow DELTA 3 1500 is used to power a boiler in a house or cottage with unstable grid power. The station provides stable pure sine wave output - important for correct automation operation. It is suitable for connecting a boiler and one or two pumps without overloading the system.
UPS mode helps avoid heating interruption during a blackout. The station supports charging from wall outlet, car, and solar panels, as well as connection of an additional battery. Its compact body and display simplify installation and operation monitoring.
Key features:
Suitable for boiler and pumps
Pure sine wave
UPS mode
Charging from grid, car, and solar panels
Option to expand with battery
Specifications:
Battery capacity: 1536 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
15. EcoFlow DELTA 2
EcoFlow DELTA 2 is used as a backup power source for a boiler in an apartment or house with moderate load. The station is suitable for gas boilers with automation and one or two pumps. The pure sine wave ensures correct control board operation and reduces the risk of failures during voltage fluctuations. The power reserve is sufficient for simultaneous connection of the boiler and some household appliances.
The model supports UPS mode, so power switches automatically during an outage. The station can be charged from a wall outlet, car, or solar panels; connection of an additional battery is also provided. The compact body and display allow placement near heating equipment and convenient load monitoring.
Key features:
Suitable for powering boiler and pumps
Pure sine wave
UPS mode
Option to connect an additional battery
Charging from grid, car, and solar panels
Specifications:
Battery capacity: 1024 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connections: AC, USB-A, USB-C, DC, car socket
How to choose a charging station for a boiler without unnecessary mistakes
Choosing a charging station for a boiler is best based on real-world practice rather than "maximum headroom for everything". Here is what really deserves attention.
Output signal type: Pure sine wave ensures correct operation of boiler automation and circulation pumps without failures or errors.
Continuous power: Continuous power must cover boiler and pump operation without overloading the station.
Battery capacity: Capacity determines how many hours the boiler can run during a power outage.
UPS mode: UPS mode allows the heating system to continue operating without restart when the grid fails.
Battery type: LiFePO4 stands out for its resistance to frequent charge cycles and longer service life.
Number of AC outlets: Multiple outlets allow connecting the boiler and related devices without extension cords.
Charging methods: Various charging options simplify restoring energy reserve during prolonged outages.
Size and placement: Station dimensions should match the available space next to the boiler or in the technical room.
Choosing a station for a boiler is not about the highest numbers in the specifications. It is about stability, correct signal, and sufficient energy reserve for your specific heating system.
Conclusion
A charging station for a boiler is a solution that allows the heating system to operate without interruptions during power outages. It is important to consider not only battery capacity, but also output signal stability, real power output, and the presence of UPS mode. A boiler is sensitive to power quality, so technical parameters here are more important than appearance and extra features.
The appropriate model is determined by your specific heating system and the expected duration of autonomous operation. When you understand the load and tasks in advance, the choice becomes calm and clear - without overpaying and without the risk that the equipment will fail at the critical moment.