Features
Easy to print — suitable for beginners
Smooth surface finish
Biodegradable material
Diameter: 1.75 mm ± 0.03 mm
Compatible with AMS and AMS Lite
Printing Recommendations
Drying: 50 °C for 8 hours
Store in a dry place after use
Dry before printing if the filament has absorbed moisture
More details available in the Filament Drying Guide on the Bambu Lab Wiki
Beginner-friendly and easy to print
Bambu PLA Basic is designed for maximum ease of use, making it an excellent choice for beginners and users who are just getting started with 3D printing. PLA Basic produces stable, high-quality prints without complex adjustments or special profiles.
High print quality
Bambu Lab PLA filament offers excellent surface finish and high printing speeds. Your models come out smooth, clean, and detailed — meeting or even exceeding expectations.
RFID for intelligent printing
All printing parameters are embedded into an RFID tag that is automatically read by the AMS system.
Just load and print — no additional setup required.
Recommended printing parameters:
Drying: 50 °C, 8 hours
Storage humidity: < 20% RH (sealed, with desiccant)
Nozzle temperature: 190–230 °C
Bed temperature (with glue): 35–45 °C
Print speed: < 300 mm/s
Physical properties:
Density: 1.24 g/cm³
Vicat softening temperature: 57 °C
Heat deflection temperature: 57 °C
Melting temperature: 160 °C
Melt index: 42.4 ± 3.5 g/10 min
Mechanical properties:
Tensile strength: 35 ± 4 MPa
Elongation at break: 12.2 ± 1.8%
Flexural modulus: 2750 ± 160 MPa
Flexural strength: 76 ± 5 MPa
Impact strength: 26.6 ± 2.8 kJ/m²