Bambu Lab PLA-CF 1kg is a composite PLA filament reinforced with carbon fiber, designed for printing rigid, dimensionally stable parts with a professional matte finish. The carbon fiber filling reduces deformation and improves stiffness while maintaining the ease of PLA printing.
PLA-CF is ideal for enclosures, mounts, engineering parts, and functional prototypes where rigidity and dimensional accuracy are essential.
⚠️ Use of a hardened steel nozzle is recommended due to the abrasive nature of carbon fiber.
Features
Carbon fiber reinforced PLA (PLA-CF)
Increased stiffness and dimensional stability
Matte technical surface finish
Minimal warping and shrinkage
Ideal for functional and load-bearing parts
Diameter: 1.75 mm ± 0.03 mm
Compatible with AMS and AMS Lite
Printing technology: FDM
Recommended printing settings
Drying: 55 °C, 8 hours
Storage: < 20 % RH, airtight with desiccant
Minimum nozzle temperature: 200 °C
Nozzle temperature range: 200–240 °C
Bed temperature (with adhesive): 35–45 °C
Maximum printing speed: up to 200 mm/s
Physical properties
Density: ~1.30 g/cm³
Vicat softening temperature: ~63 °C
Heat deflection temperature: ~60 °C
Melting temperature: ~160 °C
Mechanical properties
Increased stiffness compared to standard PLA
Low elongation at break
High dimensional stability
Good layer adhesion for a composite filament