Features:
Easy to print — beginner-friendly
Matte surface texture
Biodegradable material
Diameter: 1.75 mm ± 0.03 mm
Compatible with AMS
Printing Recommendations
Drying: 55 °C for 8 hours
Store in a dry place after use
Dry before printing if the material has absorbed moisture
More details: Filament drying instructions on the Bambu Lab Wiki
RFID for Intelligent Printing
All printing parameters are embedded in an RFID tag, which is automatically read by the AMS system.
Just load and print — no complicated setup required.
Recommended Printing Parameters
Drying: 55 °C, 8 hours
Storage humidity: < 20% RH (sealed with desiccant)
Nozzle temperature: 190–230 °C
Bed temperature: 35–45 °C (with glue)
Printing speed: < 300 mm/s
Physical Properties
Density: 1.31 g/cm³
Vicat softening temperature: 63 °C
Heat deflection temperature: 58 °C
Melting temperature: 163 °C
Melt index: 39.4 ± 3.2 g/10 min
Mechanical Properties
Tensile strength: 30 ± 5 MPa
Elongation at break: 14.8 ± 4.2%
Flexural modulus: 2360 ± 250 MPa
Flexural strength: 53 ± 6 MPa
Impact strength: 19.2 ± 3.7 kJ/m²