Key features
Very flexible thermoplastic polyurethane with Shore 85A hardness
High elasticity and excellent recovery after deformation
Excellent layer adhesion with minimal shrinkage
Soft, rubber-like printed parts
Ideal for functional flexible components
Filament diameter: 1.75 mm ± 0.03 mm
Compatible with AMS and AMS Lite (dry storage required)
Printing recommendations
Drying: 50 °C for 8 hours
Store in a sealed container with desiccant (< 20% RH)
Use a nozzle of at least 0.4 mm
Minimize retractions and avoid aggressive accelerations
Lower print speeds for stable filament feeding
Physical properties
Density: ≈ 1.18 g/cm³
Tensile strength: 35–45 MPa
Elongation at break: 550–650 %
Hardness: Shore 85A
Applications
Gaskets, seals, and cushioning elements
Flexible tubes, straps, and covers
Parts requiring high elasticity
Prototypes of soft functional components